* The prices are net. For private individuals, 23% VAT will be added.
(excl. VAT)*
€62.00
-50%
€125.00
END PLATE I-BEAM JOINT
Module enables the design and verification of a steel connection using beams with the I-beam cross-section,
with the possibility of applying bisymmetric ribbing.
The EuroConnections END PLATE I-BEAM JOINT module enables the design and verification of a steel connection using beams with the I-beam cross-section, with the possibility of applying bisymmetric ribbing.
The connection is made using bolts through rectangular front plates. Design and verification is performed based on a user-defined two-way set of transverse forces, taking into account bending moments or the load-bearing capacity of beam sections. The connection is analyzed for stiffness.
Module features:
Ribs:
- comprise a set of pairs of plates extending from the corners of the main cross-section in directions perpendicular to the plate edges (orthogonal projection)
- ribbing is welded to the I-beam and the front plate
- the use of ribs for both sides (beams) is mutually independent
Front plates:
- has a rectangular shape
- is circumferentially welded to its corresponding I-beam
- the beam's cross-section is centrally or eccentrically located on the plate
- front plates are connected using screws, which can be arranged in multi-column rows
General:
- based on the user-defined connection model, the program allows for the automatic generation of workshop drawings of the base plate in DXF format, including a list of connecting parts
- calculations are conducted for the end plate connection of two I-beams for a set of spatial forces (two-way bending, two-plane shearing)
- the program enables node counting from the ArCADia-RAMA program
- beam axes can meet at an angle and/or eccentrically
- end reinforcement(s) of one or both beams can be applied using ribs in various bisymmetric configurations
Copyright © 2021 ArCADiasoft
HOME | PRODUCTS | COMPANY | CONTACT | FOR RESELLERS