Copyright © 2019 ArCADiasoft
General:
- advanced and dynamic sketch of the designed connection model in an editable DXF format, which includes a bill of materials
- calculations can be performed for T, Y, K, N and KT type of joints
- if more than two bars converge at the joint (KT-joints) - their axes should converge in a single node point
Gusset plate:
- gusset plate of any rectangular dimensions
- longitudinally connected to the chord with a T-weld
Chord:
- cross-sections for the chord are I-beam sections
- the orientation of the I-beam section is vertical (flanges subject to compression/tension as a result of a bending moment acting about the stronger axis of inertia)
Braces:
- possible cross-sections for the vertical and diagonal bars are: rectangular / square tubes (tee joint), C-sections or L-sections
- possible model configurations for braces with rectangular or square tube section includes: contact with the gusset plate through slotted end section (T-shaped connection), welded connection
- possible model configurations for L-section braces includes: the use of doubled section (cross-section symmetry), welded or bolted connection, contact with the gusset plate along the L-section arm
- possible model configurations for C-section braces includes: the use of doubled section (cross-section symmetry), welded or bolted connection, contact with the gusset plate along the C-section web plane
Module features:
A EuroConnections program module.
Connection type TRUSS GUSSET PLATE connection, welded or bolted, verification for sets of uniplanar internal forces, or the full bearing capacity of members.
TRUSS GUSSET PLATE connection + DXF
Design module for a truss gusset plate connections according to PN-EN 1993-1-8:2006 standard, with DXF drawing generation function.
€125.00
(zzgl. MwSt.)*
*Bei den Preisen handelt es sich um Nettobeträge. Für Privatpersonen werden 23% Mehrwertsteuer hinzugefügt.
