* The prices are net. For private individuals, 23% VAT will be added.
(excl. VAT)*
€62.00
-50%
€125.00
I-BEAM COLUMN BASE + DXF
Design module for an I-beam column base subjected to biaxial loading conditions according to PN-EN 1993-1-8:2006 standard, with DXF drawing generation function.
A EuroConnections program module.
Connection type I-BEAM COLUMN BASE, fixed or pinned, for I-beam column sections, verification for sets of spatial internal forces, or the full bearing capacity of column cross-section.
Module features:
Anchors:
- straight anchors, J-anchors, L-anchors and headed anchors
- possible arrangement in two distinct modes - along each side of the base plate and in a mode with exactly 4 corner fasteners
Tensile failure modes:
- steel failure
- pull-out failure
- concrete cone failure
- combined pull-out and concrete failure
- splitting failure
- blow-out failure
Shear failure modes:
- steel failure of fastener
- concrete pry-out failure
- concrete edge failure
Base plate:
- rectangular base plate
- column section centered on the base plate
Stiffeners:
- in the form of a set of pairs of plates connected to column section corners, in directions perpendicular to the edges of the base plate (orthogonal projection)
General:
- advanced and dynamic sketch of the designed connection model in an editable DXF format, which includes a bill of materials
- cross-sections for the beam are I-beam sections
- possibility of the design and verification of pole/column base obtained from ArCADia RAMA structure model
- column anchored in the foundation block at a straight angle
- bisymmetrical configuration of the joint model
- the possibility of using a shear nib
- the possibility of reinforcing the column base with stiffener plates (in enumerated configurations)
- checking the limitations on the size of the weld according to PN-EN 1708-2: 2019-02
Copyright © 2021 ArCADiasoft
ГОЛОВНА | ПРОДУКЦІЯ | ПРО НАС | КОНТАКТИ | ДЛЯ ПРЕДСТАВНИКІВ