REINFORCED CONCRETE COMPONENT

REINFORCED CONCRETE SLAB

REINFORCED CONCRETE COLUMN

ArCADia-RAMA

TO THE TOP

ADDITIONALLY PAID FUNCTIONS:

Automatic 3D construction view created on the basis of a three-dimensional architectural model of a building.

Transferring the location and the material as well as the bar cross-section to the construction view. Passing the remaining elements of the architectural model in the form of a rendered or translucent 3D view, and in the case of modular axes, bar elements and surface elements also in the form of their active underlay.

Inserting the binding joist with the insertion of longitudinal reinforcement and stirrups.

Constructing the structural systems of Teriva ribbed-beam roofs, containing all the basic elements of the system: ceiling beams, reinforcing ribs, hidden ribs, trimmer beams, supporting mesh and additionally all necessary material lists including the elements needed to make the ceiling, completed with reinforcing steel and monolithic concrete.

CONSTRUCTION

TO THE TOP

Export of material lists of elements included in the project to RTF, CSV and to the Ceninwest program.

IFC file conversion into ArCADia's basic objects (walls, windows, doors, ceilings, roofs).

Possibility to enlarge the library of 2D/3D objects with the formats: XOBJECT, ACO, O2C, OBJ, XOBJ3D and DWG.

Import of PDF files analogously to raster underlays or with conversion to vector elements. Export to a PDF file.

Importing/editing raster image files: JPG, TIF, BMP, PNG.

AutoCAD format from 2.5 to 2018 (DWG, DXF).

COMMUNICATION

ADDITIONALLY PAID FUNCTIONS

TO THE TOP

Generating a list of materials used in the project.

Possibility to modify symbols of entered objects and assign receivers to a particular distribution board.

Possibility to assign receivers to a particular distribution board (addressing).

An extensive library of manufacturers' catalogues of electrical installation elements.

Designation of cable routes.

Drawing of internal electrical installations with distribution boards, sockets, connectors, boxes, lighting fixtures.

ELECTRICAL INSTALLATIONS

ADDITIONALLY PAID FUNCTIONS

TO THE TOP

Checking the installation for connection correctness.

Inserting the fastening with the possibility of defining parameters characteristic for the fastening used.

Automatic creation of point numbering and installation descriptions. Creating own templates.

Fittings and devices from the manufacturer's library.

Heat receivers, i.e. panel, ribbed, bathroom and channel heaters, heating pipes, air heaters and fan-coil units.

Ready-made materials lists, devices and connection fittings. Lists of receivers in rooms.

HEATING INSTALLATIONS

ADDITIONALLY PAID FUNCTIONS

TO THE TOP

Saving layouts made of many elements, e.g. part of the installation, to the program library, in order to reuse it. Creating descriptions and saving your own annotation templates.

Generating lists of materials and devices included in the project, intended for further processing and for the creation of cost estimates and investment valuations.

Preparation of the ventilation flow and usage report based on the object architecture (or user-defined rooms). User-assumed required flow values ventilation air may remain automatically assigned and updated in air supply elements /located in the rooms’ data .

Possibility to define any number of ventilation systems used in the project and their properties, including air parameters (in terms of temperature and relative humidity).

Preview of the installation in 3D view, which facilitates the correction of irregularities in the route of the ducts not shown on the plan.

Inserting duct elements and fittings (made of various materials) with round, rectangular and oval cross-sections. Inserting ventilation devices from the manufacturers' library with the option of adding your own objects.

Creating drawings of the internal ventilation system - from intake/exhaust elements, through ventilation devices (fans, heaters, fire dampers, etc.), to the end elements of the installation in the form of air inlets and outlets.

NEW

VENTILATION SYSTEMS

TO THE TOP

ADDITIONALLY PAID FUNCTIONS

Checking the installation for connection correctness.

Possibility to easily and quickly enter additional databases to the main library.

Fittings and devices from the manufacturers' library.

Ready-made lists of materials and lists of elements.

Automatic generation of a set of connection fittings.

Drawings of the internal gas installation.

GAS INSTALLATIONS

Checking the installation for connection correctness.

Automatic generation of sets of connection fittings. Changing many elements of the installation at the same time.

Pipelines with automatic distinction between outflow channels, risers and connecting pipes for accessories.

Entering the pipeline route of the sewage system with a given slope on the view.

Generating ready-made materials lists, devices and connection fittings included in the project.

3D installation preview, which facilitates the correcting of irregularities in the pipeline route not shown on the view.

SEWAGE INSTALLATIONS

TO THE TOP

Generating ready-made materials lists, devices and connection fittings included in the project.

Checking the installation for connections correctness.

Automatic generation of connection fittings, creation of point numbering and installation description. Creating own templates.

Inserting fittings and devices from the manufacturers' library. Inserting devices with individually set shapes and dimensions defined by the user (eg DHW heaters). Inserting into the program library typical element systems.

Applying risers and distribution pipes from a library. It is possible to simultaneously run several parallel conduits with different functions and connect them intelligently. Drawing simplifications that allow you to change the level of many elements of the installation at the same time.

Drawings of the internal water supply system | connection point | water meter set | pipelines.

WATER SUPPLY INSTALLATIONS

Inserting an automatic roof on the closed external walls contour. Inserting of roof windows and dormer windows.

Inserting automatic ceilings on the closed external walls contour.

Creating a level with the possibility of copying selected elements.

Defining one- and multi-flight stairs and winder stairs in any view.

Automatic creation of rooms from the closed outlines of walls and virtual walls, assigning names, functions, temperature and lighting demand.

Inserting of window and door woodwork in a parametric way. Inserting woodwork.

Choosing an already defined wall or drawing a multi-layer wall yourself. Built-in catalog of construction materials.

ARCHITECTURE

Dimensioning

Possibility of entering linear and angular dimensioning.

Elements

Built-in library of all element types, with the possibility of expansion.

Custom setting

Saving custom settings for elements (pens, fonts, default element sizes, etc.) in the project template.

Title blocks

Creating and inserting title blocks with the option of saving them to the program library.

Library

Built-in library that allows for detailing with 2D symbols and 3D objects needed in the drawing.

Collision

Collisions list of all or individual ArCADia system elements on a view, 3D view and a clear list.

Merging

The possibility to merge the building model from an architectural design with the installation design models to create one complete model of a building project.